0488 214 54587/24 ÇÖZÜM MERKEZİ
MIC Series 400 Stainless Steel Camera
Ürün Kodu: MIC Series 400 Stainless Steel Camera
Ürün Grubu: CCTV Sistemleri
Marka: Bosch
Grade 316L stainless steel construction
Rated to an industry leading IP68
Host of mounting and viewing options
Integrated heater and long-life wiper
Multi-protocol operation
  • Teknik Özellikler
  • Image sensor 1/4‑inch EXview CCD, WDR (36x only)
    Horizontal resolution 18x module, 470 TVL NTSC/PAL typical36x module, 530 TVL NTSC/PAL typical
    Filter Automatic mechanical IR cut filter
    Focus system Auto or manual
    Iris Auto or manual with slow shutter integration modes
    Synchronization Internal / External (V‑Lock)
    Signal/Noise ratio 50 dB or more
    Back Light Compensation (BLC) On/Off
    White balance Automatic
    Automatic Gain Control (AGC) –3 to –28 dB, 2 dB steps
    Aperture control 16 Steps
    Lens F=4.1 mm (wide) to 73.8 mm (tele), F1.4 to F3.0
    Zoom 18x optical (12x digital)
    Angle of view 48° (wide) to 2.8° (tele)
    Minimum illumination 0.7 lux (F1.4, 1/60s NTSC, 1/50s PAL)0.11 lux (F1.4, 1/4s NTSC, 1/3s PAL)0.01 lux (F1.4, 1/4s NTSC, 1/3s PAL ICR on)
    Shutter speed 1/1 to 1/10,000 s (22 steps) NTSC, PAL
    Lens F=3.4 mm (wide) to 122.4 mm (tele), F1.6 to F4.5
    Zoom 36x optical (12x digital)
    Angle of view 57.8° (wide) to 1.7° (tele)
    Minimum illumination 1.4 lux (1/60 s NTSC, 1/50 s PAL, typical, F1.6, 50IRE)0.1 lux (1/4 s NTSC, 1/3 s PAL, typical, F1.6, 50IRE)ICR-ON mode: 0.01 lux (1/4 s NTSC, 1/3 s PAL)
    Shutter speed 1/4 to 1/10,000 s (20 steps) NTSC, 1/3 to 1/10,000 s (20 steps) PAL
    Auto flip Yes
    Manual flip Yes
    Dynamic privacy zones Standard, 3D privacy masking with infinite zones
    Presets 64 telemetry presets utilizing resolver technology (using FV protocol, 10 camera set-up presets to allow ANPR, color correction etc.)
    Preset tours 6 tours each with up to 32 presets
    Sector titles Yes (64 sectors) 20 characters per title
    Preset titles 20 character caption for each of the 64 presets
    Home position Yes (preset 1 or tour)
    Communication RS485 / RS422
    Control protocol Bosch or FV protocol cameras available; additional protocols supported are Pelco D, Kalatel, 360 Vision, American Dynamics, Panasonic, Molynx, VCL, and Vicon. These can be loaded using the MIC-USB485CVTR signal converter and Cam-set via a PC.Biphase control requires a Biphase to RS485 converter (MIC-BP4, available separately) installed in the MIC Series PSU to connect to Biphase equipment.
    Video Co-axial via composite cable
    Telemetry Twisted pair. Simplex, half and full duplex operation via composite cable
    MIC Universal Camera Setup Software Utility (Cam-set) Supplied with each camera, Cam-set allows direct connection to a USB equipped PC via the MIC Series PSU or over a full duplex or IP network to provide access to all camera functions and useful diagnostic tools
    USB to RS485 signal converter Allows MIC Series cameras to connect to a PC (supplied free with MIC Series 400 stainless steel camera or available separately)
    Power Via composite cable
    Alarm inputs 1 tamper input (additional inputs possible with optional alarm card in PSU)
    Alarm communication Tamper switch (ground connection)
    Drive unit Brushless integral pan/tilt motor drive
    Pan angle 360° continuous rotation
    Pan speed 6° to 90° per second (variable)
    Tilt angle 270°
    Tilt speed 0.2° to 90° per second (variable)
    Speed control Closed loop electronics
    Preset accuracy ±0.56° (typical)
     
    Proportional P/T to zoom Yes
    Construction material Grade 316L stainless steel
    Viewing window Tempered flat glass
    Window wiper Standard, long-life silicone wiper
    Heater Standard
    Standard colors Stainless Steel (no color options)
    Standard finish Stainless Steel (no finish options)
    Dimensions (W x H x D) 205 x 360 x 165 mm (8.07 x 14.17 x 6.50 in.)(upright and inverted)
    Weight 16.5 Kg (36.38 lb)(including 4-in. (101.6 mm) pitch circle diameter (PCD) base)
    Configurations available Upright mount or upright canted at 45° mount. (Inverted mount is possible using software setting and upright camera.)
    Operational temperature -40 °C to +50 °C (-40 °F to +122 °F)
    Weatherproofing IP68 (1m submersion for 24 hrs)
    Input voltage 18 VAC
    Power consumption 25.2 W max. (with heater off)
      37 W max. (with heater on)
    <1

    © 2015 Worldlan Bilişim Teknolojileri
    www.worldlanbilisim.com.tr